“We switched to Mathawker for our 5-axis CNC milling after struggling with axial backlash on a 12-ton progressive die. Their toolpath optimization eliminated the issue completely — we now hold ±5 microns on every insert pocket.”

“The vertical turning team machined a 1.8-meter bolster plate for our transfer press. Surface finish came in at Ra 0.3 µm, and concentricity was within 8 microns. No rework needed — that never happens with our previous supplier.”

“We needed wire EDM for a complex cooling channel network inside a hardened D2 die block. Mathawker delivered sharp internal radii of 0.1 mm with a recast layer under 2 µm. The die ran 40% cooler on the first try.”

“After a year of inconsistent results from other shops, we gave Mathawker a trial on a set of guide posts and bushings. Every dimension matched the CMM report. Now they handle all our vertical turning work.”

“Their EDM team understood our need for mirror finishes on forming surfaces without post-polishing. Sinker EDM on a 56 HRC insert produced a surface finish of Ra 0.15 µm. That saved us two days of hand work per die.”